Fisher Remanufactured Valves

When our valves are received, they are given full scrutiny as to their suitability to be remanufactured. All wearable parts and seals, as well as bushings, are replaced with original specification parts. The finished product is tested under ISO 9000 norms, as though it were new. In most cases, the only original parts are the body and covers. Our warranty exceeds OEM standards. You can buy with confidence from AMEXPORT!

We can provide any type of valve to fit your industry needs. Below is a sampling of the lines we offer.

 

Quote Request Form (PDF)

 

   

Fisher V100 Control Valve

E-Series Sliding Stem Globe, Rotary, Butterfly (Other Stock Available)

 

     
   

Fisher V150 Control Valve

Rotary Style. (Different configurations available. Call for details.)

 

     
   

Fisher V200 Control Valve

E-Series Sliding Stem Globe, Rotary, Butterfly (Other Stock Available)

     
   

Fisher V500 Control Valve

E-Series Sliding Stem Globe, Rotary, Butterfly (Other Stock Available)

     
   

Fisher 8500 Butterfly Control Valve

E-Series Sliding Stem Globe, Rotary, Butterfly (Other Stock Available)

 

     
   

Fisher 9500 Butterfly Control Valve

E-Series Sliding Stem Globe, Rotary, Butterfly (Other Stock Available)

     
   

Fisher E-Body Slide Stem Globe Control Valve

Long a standard in process control, Fisher E-Body Valves provide excellent:

Economy - Modular design cuts spare part inventory costs.

Application Flexibility - Available in sizes from 1/2" -6", end connections, port diameters, and trim materials provides superior control versatility.

Long Trim Life - Hardened trim materials provide excellent wear resistance. Easy Maintenance® Cage-type construction simplifies inspection, removal and replacement of parts.

 

     
   

Fisher Vee-Ball Control Valve

Fisher Vee-Ball ® valves use the time-proven V-notch ball that provides high-capacity control of liquid, gas, steam, and fibrous slurries. The shearing action of the ball allows smooth, non-clogging operation, and the unrestricted, straight-through flow ensures high capacity. Available in corrosion resistant materials, in sizes from 1" – 6".

 

     
   

Fisher 546 Transducer

The Fisher type 546 Series Electro-Pneumatic Transducer receives a direct-current input signal and converts the signal to proportional pneumatic output signal.

input:   4-20 or 10-50 mA
output:   3-15 psig, 6-13 psig or 3-27 psig
accuracy:   +/-0.75% of span
power:   5 psi higher than upper range limit of the output signal
     
   

Fisher 846 Transducer

The Fisher 846 Series I/P Transducer converts an electronic signal into a specified proportional pneumatic signal.

input:   4-20 mA, 4-12 mA or 12-20 mA
output:   3-15 psig, 3-27 psig, 6-30 psig, 0.2-1.0 Bar or 0.2-1.0 kg/cm3
     
   

Fisher 3582I Positioner

The 3582 Series pneumatic valve positioners and the Type 3582i electro-pneumatic valve positioners, are used with diaphragm-actuated, sliding-stem control valve assemblies. The pneumatic valve positioners receive a pneumatic input signal from a control device and modulate the supply pressure to the control valve actuator, providing an accurate valve stem position that is proportional to the pneumatic input signal.

input:   4 to 20 mA dc constant current with 30 Vdc maximum compliance voltage, can be split range
materials:   Positioner Case: Low copper aluminum alloy. Cover: Impact-resistant plastic Bellows: Phosphor bronze. O-Rings: All 3582 except 3582NS: Nitrile (standard) or Fluoroelastomer (high-temperature)

 

     
   

Fisher 3582 Positioner

The 3582 Series pneumatic valve positioners and the Type 3582i electro-pneumatic valve positioners, are used with diaphragm-actuated, sliding-stem control valve assemblies. The pneumatic valve positioners receive a pneumatic input signal from a control device and modulate the supply pressure to the control valve actuator, providing an accurate valve stem position that is proportional to the pneumatic input signal.

input:   0.2 to 1.0 bar (3 to 15 psig), 0.4 to 2.0 bar (6 to 30 psig), or split range
materials:   Positioner Case: Low copper aluminum alloy. Cover: Impact-resistant plastic Bellows: Phosphor bronze. O-Rings: All 3582 except 3582NS: Nitrile (standard) or Fluoroelastomer (high-temperature)
     
   

Fisher 3600 Positioner

The 3600 Series Valve Positioner accepts a pneumatic or milliampere input signal to adjust the valve shaft to the correct position for the specific input signal applied. For use on Fisher Controls Control Valves with butterfly or ball valve bodies and rotary actuators.

input:   3-25 psig (0.2-1.0 bar), 6-30 psig (0.4-2.0 bar) or 4-20 mA
actions:   Direct or Reverse, Single or Double Acting
     
   

Fisher 4150 Controller

The 4150/4160 Series Pneumatic controllers receive a mechanical input form an integrally mounted bellows element or bourdon tube, compare it to a set point and produce a pneumatic output signal.

input:   Bellow Elements: 0-30 in Hg VAC, 0-60 in H2O, 0-5 psig, 0-10 psig, 0-15 psig, 0-30 psig Bourdon Tubes: 0-30 in Hg VAC, 0-60 psig, 0-100 psig, 0-200 psig, 0-300 psig, 0-600
materials:   Case: Pressure Die Cast Aluminum Cover: Bellows Elements: Brass or 316 SS Bourdon Tubes: Brass, Steel or 316 SS
modes:   Proportional
actions:   Direct or Reverse, field-switchable
     
   

Fisher 4160 Controller

The 4150/4160 Series Pneumatic controllers receive a mechanical input form an integrally mounted bellows element or bourdon tube, compare it to a set point and produce a pneumatic output signal.

modes:   Proportional plus Reset
actions:   Direct or Reverse, field-switchable
     
   

Fisher DVC5000 Controller

The DVC Series Digital Valve Controllers are communicating, microprocessor-based current-to-pneumatic instruments. In addition to the traditional function of converting a current signal to a valve-position pressure signal, DVC Series Digital Valve Controllers, using HART commmunications protocol, give access to information critical to process operation. The DVC5000 can be used with single-acting actuators.

range:   As required by the actuator, up to 95% of supply pressure. Minumum Span: 6 psi Maximum Span: 90 psi
power:   Supply Pressure - Minimum and Recommended: 5 psi higher than maximum actuator requirements; Maximum: 100 psig
actions:   direct only
     
   

Fisher DVC6000 Controller

The DVC Series Digital Valve Controllers are communicating, microprocessor-based current-to-pneumatic instruments. In addition to the traditional function of converting a current signal to a valve-position pressure signal, DVC Series Digital Valve Controllers, using HART commmunications protocol, give access to information critical to process operation. The DVC6000 can be used with single-acting or double-acting actuators.

range:   As required by the actuator, up to full supply pressure. Minumum Span: 6 psi Maximum Span: 140 psi
power:   Supply Pressure - Recommended: 5 psi higher than maximum actuator requirements, up to maximum supply pressure; Maximum: 150 psi or maximum pressure rating of the actuator, whichever is lower
actions:   double, single direct, and single reverse

For more information, or if you don't see what you need, please contact us.
Phone (713) 334-6008    •    Fax (713) 334-0922    •    E-mail: Sales@Amexportint.com

Amexport International
3914 Fairhill Drive
Houston, TX 77063

Phone: 713-334-6008
Fax: 713-334-0922

Sales@Amexportint.com

 

© 2018 Amexport International